Since 2024, Gmail and Outlook have been rejecting messages that do not meet precise technical requirements. Here is what is blocking your emails, and the order in which to fix it.
Direct answer
Your emails go to spam mainly for six reasons: missing SPF, DKIM and DMARC authentication, crossing the threshold of 5,000 messages a day without knowing it, a complaint rate that is too high, an unsubscribe process that is hard to use, a list that has never been cleaned, and a contact base built without valid consent in Luxembourg.
What has changed since February 2024
For a long time, deliverability was a matter of folklore: you avoided the word “free” in capital letters and hoped for the best. Those days are over. The major email providers now publish written, dated requirements, and they enforce them.
Google imposed a first set of rules on all senders writing to personal Gmail accounts from 1 February 2024: SPF or DKIM authentication, valid reverse DNS records, a TLS connection, a format that complies with the RFC 5322 standard, and a spam rate kept below 0.3% in Postmaster Tools. From 5,000 messages a day, the regime becomes much stricter.
Microsoft followed. Since 5 May 2025, senders of more than 5,000 messages a day to Outlook.com, Hotmail.com and Live.com must have aligned SPF, DKIM and DMARC. Non-compliant messages are not sent to the junk folder: they are rejected by the server, with a 550 5.7.15 error.
Worth remembering
A non-compliant message no longer ends up in a folder where the recipient might find it. It is rejected. Your dashboard will sometimes show a successful send even though the message never arrived.
For an SME in Luxembourg or the Greater Region, the consequence is concrete: with a contact base split between Gmail, Outlook and Microsoft 365, a shaky configuration affects most of your recipients at the same time.
Mistake 1: sending without SPF, DKIM or DMARC
This is the most widespread cause, and the easiest to fix. These three DNS records each answer a different question.
- SPF declares which servers may send email on behalf of your domain.
- DKIM signs the message, which lets the receiving server check that it has not been altered.
- DMARC says what to do when a message fails the previous checks, and sends you reports.
Google requires SPF or DKIM from all senders, and all three from bulk senders. One detail often goes unnoticed: sending to personal Gmail accounts requires a DKIM key of at least 1,024 bits, and Google recommends 2,048 bits.
The classic trap for an SME is the stacking of tools. Your website sends forms, your invoicing sends reminders, your campaign tool sends the newsletter. Each one must appear in your SPF record. When a provider adds a service without updating the DNS, everything goes to spam.
Mistake 2: crossing the 5,000 threshold without knowing it
Many business owners believe they are outside the scope of the rules for bulk senders. The calculation is quickly done, though: Google counts the messages sent to personal Gmail accounts over 24 hours, across all tools, from a single domain. A base of 6,000 contacts, half of them Gmail addresses, one campaign sent all at once, and you are close to the threshold. The same reasoning applies at Microsoft.
Practical consequence. Beyond 5,000 messages a day, three points become mandatory: DMARC, alignment between the domain shown in the “From” field and the SPF or DKIM domain, and one-click unsubscribe. These are not recommendations.
Google also recommends increasing volume gradually: suddenly doubling the number of sends can trigger rate limiting or damage the domain’s reputation.
Mistake 3: steering by open rate instead of complaint rate
This is the most puzzling mistake, and the one that costs the most. Most SMEs judge a campaign by its open rate. Yet Google is explicit: it does not monitor this rate, it cannot verify the accuracy of the figure provided by third-party tools, and a low rate is not a reliable sign of a deliverability problem.
The indicator that really decides the fate of your campaigns is the complaint rate, in other words the proportion of recipients who click “report as spam”. Google asks you to keep it below 0.3%, and recommends staying below 0.10% to absorb occasional spikes.
| Indicator | What it really measures | Threshold published by Google |
|---|---|---|
| Complaint rate | Domain reputation with Gmail. Determines whether your future messages arrive. | Below 0.3%, ideally below 0.10% |
| Open rate | Nothing from Gmail’s point of view. Google does not monitor it. | None |
| Authentication | Whether the message is properly signed and attributable to your domain. | SPF or DKIM, all three for bulk senders |
Mistake 4: making unsubscribing a chore
Commercial instinct pushes you to hide the unsubscribe link. You need to do the opposite, for a simple arithmetical reason: a recipient who cannot find the link clicks “report as spam”. You have not kept a subscriber, you have damaged your domain’s reputation for everyone else.
Google requires bulk senders to offer one-click unsubscribe, with a visible link in the body of the message. This relies on two fields to include in outgoing messages, List-Unsubscribe-Post and List-Unsubscribe, described in the RFC 2369 and RFC 8058 standards. A link to a preferences page is not enough.
Google also recommends automatically unsubscribing addresses that bounce repeatedly. A short, clean list delivers better than a long, dead one.
Mistake 5: a bought list, or one that has never been cleaned
Google puts it bluntly: do not buy email addresses from other companies, and do not write to people who have not subscribed. Its guidelines also advise against forms where the consent boxes are ticked by default.
Setting compliance aside, the problem with a bought file is mechanical: it contains outdated addresses that generate bounces, and trap addresses kept by providers to detect this type of sending. A single send is enough to damage the reputation of a healthy domain for a long time.
The habit that protects you. Send from a domain dedicated to campaigns, separate from the one that carries your business email. If a campaign goes badly, your quotes and invoices keep arriving.
Cleaning is nothing sophisticated: remove addresses with permanent errors and those with no sign of life for 12 to 18 months. These limits are benchmarks commonly used in the market, to be adjusted to your sales cycle.
Mistake 6: confusing an existing customer with a cold prospect
This is where the Luxembourg framework deserves a careful reading, because it is not limited to the GDPR. The CNPD reminds us that the amended Luxembourg law of 30 May 2005 continues to apply to electronic communications, alongside the GDPR. It distinguishes two situations, which are often confused.
- An existing contractual relationship (sale or services): you can use your customer’s email address for advertising purposes without prior consent. In return, they must be able to object at any time, and be informed of this right when the data is collected and in every message.
- No prior link: consent must be requested before electronic messages are sent.
Two symmetrical mistakes follow: asking existing customers for consent again, which empties a usable base, or treating cold prospects as customers, which exposes the business and feeds the complaint rate.
If your collection goes through a form, the question joins that of cookie banners, covered in our article on cookie and GDPR mistakes in Luxembourg.
Where to start, and in what order
The order matters: polishing the content of a campaign before sorting out authentication is like repainting a façade on cracked foundations.
- Check authentication: SPF, DKIM and DMARC published, all your sending tools declared in SPF.
- Open Postmaster Tools and follow the complaint rate and the domain’s reputation.
- Measure your real volume to Gmail and consumer Outlook over 24 hours, across all tools.
- Set up one-click unsubscribe with the expected fields, not just a link in the footer.
- Clean the list and separate existing customers from cold prospects, with the matching legal basis.
- Isolate your sending on a domain dedicated to campaigns.
The first four points are configuration and can be handled in one to two days of work, an indicative order of magnitude to adjust to the number of tools connected to your domain. The last two need a decision from you, not just a technical intervention.
Once your deliverability is sorted, email becomes a usable channel again to generate qualified prospects, especially when connected to an up-to-date CRM and automated workflows.
Frequently asked questions
My emails reach my colleagues, so why not my customers?
Internal mail does not go through external filters. It therefore proves nothing about your authentication. Only a send to a Gmail or Outlook address outside your organisation lets you see how your messages really behave.
Am I affected if I send fewer than 5,000 messages a day?
Yes, partly. Since 1 February 2024, all senders writing to personal Gmail accounts must meet a baseline: SPF or DKIM, valid reverse DNS, a TLS connection and a spam rate below 0.3%. Only DMARC and one-click unsubscribe depend on the 5,000 threshold.
Is a DMARC policy set to “none” enough?
To meet Google’s requirement for bulk senders, yes: the documentation states that the enforcement policy can be set to “none”. That said, a permissive policy does not protect your domain against spoofing. Moving to a stricter policy is something you prepare after analysing the DMARC reports.
Can I write to my existing customers without asking for their agreement again?
In Luxembourg, yes, where there is an already established contractual basis of sale or services. The CNPD states that the customer must be able to object at any time and be informed of this right when the data is collected and in every marketing message.
How long does it take to recover a good reputation?
Google says that an improvement in the spam rate takes some time to show up in how messages are classified, without giving a figure. In practice, this means fixing the cause, reducing the volume, then building back up gradually while monitoring Postmaster Tools.
Has the open rate become useless?
It remains useful for comparing two subject lines or two segments with each other. It says nothing about your deliverability, since Google does not monitor it and cannot verify its accuracy. Do not use it as a technical warning signal.
Sources
- Google, Email sender guidelines, Gmail Help, page viewed on 31 August 2026.
- Microsoft, Outlook’s New Requirements for High Volume Senders, Microsoft Community Hub, April 2025.
- CNPD, Company-customer communication and consent (in French), Commission nationale pour la protection des données, Luxembourg, updated 5 June 2025.
- RFC 8058, Signaling One Click Functionality for List Email Headers, IETF, January 2017.








